Code Compliance Analysis

Contact Name *

Company / Organization

Email Address *

Phone Number

SECTION 02

Project Location

Determines jurisdiction, code edition, wind speed, flood zone, and zoning overlay.

Full Street Address * CRITICAL FOR ACCURACY

Must be exact — used to pull zoning, flood zone, and jurisdiction-specific codes.

County CRITICAL FOR ACCURACY

Many jurisdictions enforce county-level code amendments. Critical for accurate references.

Zoning District (if known)

Found on the survey or county property appraiser site.

SECTION 03

Project Classification

Occupancy classification drives 70% of the code analysis — accuracy here directly impacts report quality.

Current / Existing Occupancy * CRITICAL FOR ACCURACY

What is the space being used for NOW (or last used for)?

Proposed Occupancy * CRITICAL FOR ACCURACY

What will the space be used for AFTER the project?

SECTION 04

Building & Space Details

Determines structural triggers, slab capacity, sprinkler requirements, and energy code applicability.

Total Tenant / Project Area (SF) * CRITICAL FOR ACCURACY

Number of Stories

Area Breakdown by Function HIGH IMPACT

Used for occupant load calculations. Approximate is fine — list each area and its approximate SF.

Year Built (approx.) HIGH IMPACT

Pre-1990 triggers asbestos survey. Pre-2002 may have older sprinkler systems.

Construction Type (if known)

SECTION 05

Applicable Codes & Standards

Check all codes that apply or may be enforced by the AHJ. Leave unchecked if unsure — we'll verify based on your jurisdiction.

ADA 2010 Standards — Americans with Disabilities Act ICC A117.1-2017 — Accessible & Usable Buildings FHA — Fair Housing Act (multi-family) CBC Chapter 11B — CA Accessibility (Title 24) TAS — Texas Accessibility Standards

ASCE 7-22 — Minimum Design Loads ASCE 7-16 — Minimum Design Loads ACI 318-19 — Structural Concrete AISC 360-22 — Structural Steel AWC NDS 2024 — National Design Spec (Wood) SDPWS 2021 — Special Design Provisions for Wind/Seismic AISI S100 — Cold-Formed Steel TMS 402/602 — Building Code for Masonry

Additional / State-Specific Code Notes

Note any known local amendments, AHJ-specific requirements, or state-adopted variations you are aware of.

SECTION 06

Scope of Work

Check all that apply. Determines which code sections, engineering disciplines, and separate permits are triggered.

Interior demolition New partition walls / layout changes Storefront / exterior facade modification Restroom addition or renovation ADA / accessibility upgrades Outdoor patio / seating area Signage (illuminated or projecting) Change of occupancy

Commercial kitchen — Type I hood Commercial kitchen — Type II hood only Kitchen suppression system (Ansul / UL 300) Bar / beverage service area Walk-in cooler / freezer Grease trap / interceptor Drive-through window Food truck / mobile commissary hookup

Structural modifications (walls, openings, beams) Roof penetrations (RTU, exhaust, curbs) Roofing replacement / re-roofing Foundation work / slab modification Mezzanine / new floor level addition Building addition / square footage increase Window or door replacement (like-for-like) Curtain wall / storefront glazing system

Fire sprinkler modification New fire sprinkler system (full) Fire alarm system — new or modification Emergency lighting / exit signs Spray booth / paint booth (H-2 scope) Hazardous materials storage

SECTION 07

Existing Building Systems

Knowing what's already in place determines upgrade requirements vs. new installations.

Existing HVAC System HIGH IMPACT

Type, capacity (tonnage), approximate age. Found on the unit nameplate or landlord records.

Existing Electrical Service HIGH IMPACT

Panel amperage and voltage. Check the main breaker or ask the landlord / electrician.

Landlord Restrictions or Lease Requirements

HOA rules, shopping center covenants, lease restrictions — anything that could affect the design or permitting scope.

SECTION 09

Available Documents

Attach anything you have — existing drawings, surveys, equipment schedules, photos. More documentation = more accurate report.

Existing Drawings / Plans?

Survey Available?

Equipment List / Specs?

Attach Project Files HELPFUL

📎

Click to browse or drag & drop files here

PDF, DWG, DXF, RVT, images, Word, Excel, ZIP · Max 20 MB per file · Up to 5 files

📬 For large files or full drawing sets (>20 MB), email them directly to support@archtri.com with your project name in the subject line. Our team will match them to your submission.

By submitting, you authorize Archtri LLC to conduct a code compliance analysis based on the information provided. Report delivery within 2–3 business days of complete submission. All information is kept confidential.

Project Submitted

Contact Information